Smith & Wesson

Smith and Wesson SD9VE 11907 Overview

HiViz fiber-optic sights equip the Smith and Wesson SD9VE 11907, a 9mm pistol with a 4-inch barrel and two 10-round magazines. The satin stainless slide sits above a textured polymer frame, giving the upper and lower a clear material contrast. Its listed overall length is 7.2 inches, with a weight of 23.2 ounces.

The striker-fired mechanism is configured without a manual thumb safety, keeping the trigger and magazine controls central to the exterior layout. Fiber-optic elements gather available light for visible aiming references. The S&W pistol's molded grip texture provides purchase beneath the upper, while the paired magazines preserve the same capacity and grip format in the supplied package.

The Smith and Wesson SD9VE measures 5.5 inches high and 1.29 inches wide. Its stainless barrel complements the satin slide above the polymer lower, with the illuminated-looking fiber elements remaining dependent on available light rather than an electronic emitter. The handgun brings those bright sight references together with a substantial grip and contrasting upper material in a straightforward two-magazine configuration.

Smith and Wesson SD9VE Key Features

• California DOJ Approved: This exact 11907 configuration is listed on the California DOJ handgun roster.
• Iron Sights: On the SD9VE, hiViz front and rear fiber-optic sights provide bright daylight references.
• Included Magazines: The SD9VE's package includes two 10-round magazines.

Smith and Wesson SD9 2.0 13931 Overview

The Smith and Wesson SD9 2.0 13931 combines a 4-inch 9mm barrel with a satin stainless slide and one 16-round magazine. The polymer-frame pistol has no manual thumb safety and uses a flat-face trigger. A listed overall length of 7.2 inches places the four-inch upper above a full gripping area, with weight specified at 22.7 ounces.

A white-dot front sight provides the leading visual reference, paired with a rear sight that can be drifted for windage. The striker-fired mechanism works within the established frame layout, and molded grip texture supplies purchase below the trigger guard. The S&W handgun's stainless upper and polymer lower remain visually separate at the dust cover and grip.

The Smith and Wesson SD9 2.0 has a listed 5.5-inch height and 1.29-inch width. Its flat trigger gives the finger a broad contact plane, complementing the texture around the frame's palm and finger interfaces. The pistol's single-magazine package keeps its contents simple, while the adjustable rear sight supplies a defined correction point within the conventional iron-sight arrangement.

Smith and Wesson SD9 2.0 Key Features

• Updated SD 2.0 Trigger: On the SD9 2.0, the revised SD 2.0 trigger has a flat face and improved pull and reset.
• Included Magazines: The SD9 2.0's package includes one 16-round magazine.
• Barrel: On the SD9 2.0, the 4-inch barrel is chambered in 9mm.

Smith and Wesson SD9 2.0 13935 Overview

The Smith and Wesson SD9 2.0 13935 pairs a 4-inch 9mm barrel and satin stainless slide with one 10-round magazine in a polymer-frame handgun. Its flat-face trigger sits within a striker-fired mechanism, and no manual thumb safety is fitted. Overall length is 7.2 inches, with a listed weight of 22.7 ounces for the full-grip configuration.

The Smith and Wesson SD9 2.0 carries a white-dot front sight and drift-adjustable rear, placing windage correction behind the bright front reference. Grip texture adds purchase to the molded lower without separate panels. The S&W pistol's flat trigger provides a clearly defined finger surface, while the satin upper contrasts with the frame around the slide rails and dust cover.

The Smith and Wesson SD9 2.0 measures a listed 5.5 inches high and 1.29 inches wide. Its single supplied magazine uses the specified ten-round capacity, maintaining a straightforward equipment package beneath the conventional upper. The pistol's full grip, visible sight references, and metal-over-polymer construction give it tangible features at the hand and eye without an additional optical sight or frame accessory listed.

Smith and Wesson SD9 2.0 Key Features

• Updated SD 2.0 Trigger: The SD9 2.0's revised SD 2.0 trigger has a flat face and improved pull and reset.
• Included Magazines: The SD9 2.0's package includes one 10-round magazine.
• Barrel: The SD9 2.0's 4-inch barrel is chambered in 9mm.

Smith and Wesson SD9 2.0 14371 Overview

FDE across the frame and slide gives the Smith and Wesson SD9 2.0 14371 a coordinated exterior around a 4-inch 9mm barrel. One 16-round magazine accompanies the pistol, which uses a polymer frame and flat-face trigger. The full-size profile measures 7.2 inches overall, with a listed weight of 22.7 ounces and no manual thumb safety.

The flat trigger provides a broad contact surface within the striker-fired mechanism. A white-dot front sight works with a drift-adjustable rear, giving the S&W pistol a bright front reference and rear windage correction. Texture on the grip supplies purchase around the magazine housing, with the FDE treatment extending over both the molded lower and metal upper.

The Smith and Wesson SD9 2.0 has a listed height of 5.5 inches and width of 1.29 inches. Those dimensions place a full grip beneath the four-inch barrel, while the supplied magazine keeps its 16-round format explicit. The handgun's matching exterior colors remain distinct from its construction: polymer forms the frame, with stainless metal specified for the slide and barrel beneath their treatments.

Smith and Wesson SD9 2.0 Key Features

• Updated SD 2.0 Trigger: On the SD9 2.0, the SD 2.0 action uses a flat-faced trigger with an improved pull and reset.
• Included Magazines: The package includes one 16-round magazine.
• Barrel: The 4-inch barrel is chambered in 9mm.

Smith and Wesson SD40VE 123403 Overview

The Smith and Wesson SD40VE 123403 combines a satin stainless slide and 4-inch .40 Smith and Wesson barrel with two 10-round magazines in a polymer-frame pistol. This California configuration has no manual thumb safety. Its full grip sits beneath a conventional upper, with a listed 7.2-inch overall length establishing the slide-and-frame proportions.

White-dot sights provide bright alignment references, while the striker-fired mechanism keeps the operating arrangement familiar around the trigger guard. Texture across the frame gives the hand purchase without removable grip panels. The S&W handgun's stainless upper contrasts with the molded lower, leaving the material transition visible at the slide rails and dust cover.

The Smith and Wesson SD40VE measures 5.5 inches high and 1.29 inches wide. Its two magazines share the same capacity, so the package supplies matching grip and ammunition formats. The pistol's white-dot sight arrangement is separate from the upper's satin finish, with the textured backstrap and grip sides providing the main contact surfaces below the enclosed firing mechanism.

Smith and Wesson SD40VE Key Features

• California DOJ Approved: This exact 123403 configuration is listed on the California DOJ handgun roster.
• Included Magazines: On the SD40VE, the package includes two 10-round magazines.
• Barrel: On the SD40VE, the 4-inch barrel is chambered in .40 S&W.

Smith and Wesson SD40VE 11908 Overview

The Smith and Wesson SD40VE 11908 combines a 4-inch .40 Smith and Wesson barrel with two 10-round magazines and HiViz fiber-optic sights. Its satin stainless slide contrasts with a textured polymer frame, giving the handgun a clearly divided material profile. The listed 7.2-inch overall length places the conventional upper above a full grip and trigger guard.

The trigger serves a striker-fired action in this configuration, with no separate manual thumb-safety lever beside the frame. Fiber-optic elements gather available light to create visible aiming references, while the molded grip texture supplies purchase at the hand. The S&W pistol's sight arrangement is a meaningful equipment detail above the slide, separate from the stainless barrel and the polymer lower's contact surfaces.

The Smith and Wesson SD40VE has a listed weight of 23.1 ounces, height of 5.5 inches, and width of 1.29 inches. Its pair of magazines shares the same capacity, keeping the supplied equipment straightforward. The pistol combines bright iron-sight references and contrasting construction materials, with a grip shape and conventional control layout that remain visible beneath the satin upper.

Smith and Wesson SD40VE Key Features

• California DOJ Approved: This exact 11908 configuration is listed on the California DOJ handgun roster.
• Iron Sights: HiViz front and rear fiber-optic sights provide bright daylight references.
• Included Magazines: The SD40VE's package includes two 10-round magazines.

Smith and Wesson SD40 2.0 13936 Overview

The Smith and Wesson SD40 2.0 13936 pairs a 4-inch .40 Smith and Wesson barrel with a 14-round magazine and satin stainless slide in a polymer-frame pistol. A flat-face trigger defines the finger-contact surface within its striker-fired action. No manual thumb safety is fitted, and the listed overall length is 7.2 inches with a weight of 22.7 ounces.

The Smith and Wesson SD40 2.0 uses a white-dot front sight and drift-adjustable rear, placing windage adjustment behind the bright front reference. Texture across the molded grip provides purchase beneath the slide. This S&W pistol keeps its frame and upper materials visually distinct, with stainless metal above the polymer lower and no removable wood or rubber panels around the grip.

The Smith and Wesson SD40 2.0 measures 5.5 inches high and 1.29 inches wide, giving the grip a full outline beneath the four-inch barrel. One magazine is supplied with the specified 14-round capacity. The handgun's flat trigger, fixed-front sight reference, and adjustable rear each provide a separate interface to evaluate alongside the contrast between its stainless upper and textured frame.

Smith and Wesson SD40 2.0 Key Features

• Updated SD 2.0 Trigger: The SD40 2.0's SD 2.0 action uses a flat-faced trigger with an improved pull and reset.
• Included Magazines: The package includes one 14-round magazine.
• Barrel: The SD40 2.0's 4-inch barrel is chambered in .40 S&W.

Smith and Wesson SD40 2.0 13937 Overview

The Smith and Wesson SD40 2.0 13937 combines a 4-inch .40 Smith and Wesson barrel with a satin stainless slide and one 10-round magazine. The polymer-frame pistol has a flat-face trigger and no manual thumb safety. At 7.2 inches overall and a listed 22.7 ounces, its full grip sits below a conventional slide profile with clearly separated front and rear sights.

The flat trigger provides a broad contact plane within the striker-fired mechanism. A white-dot front reference works with a drift-adjustable rear, allowing windage correction at the back of the sight picture. The S&W handgun's textured frame adds purchase around the magazine housing without separate traditional grip panels, keeping the lower's molded shape readily visible.

The Smith and Wesson SD40 2.0 measures 5.5 inches high and 1.29 inches wide. The stainless slide contrasts with the polymer frame, while the matching stainless barrel is part of the upper's material specification. The pistol's single included magazine, external safety configuration, and sight adjustment are all clear features of this version, complementing its flat trigger and substantial gripping area.

Smith and Wesson SD40 2.0 Key Features

• Updated SD 2.0 Trigger: The SD 2.0 action uses a flat-faced trigger with an improved pull and reset.
• Included Magazines: The package includes one 10-round magazine.
• Barrel: The 4-inch barrel is chambered in .40 S&W.